Extra smooth running 'Ball Race action'.
A high quality durable sliding door system featuring steel ball bearings running in a heavy duty aluminium track.
The bottom sliding channel fits to the door to leave the floor clear and provide easy access.
Use Ball Race Sliding Door Gearfor:
Converting an existing internal hinged door to a sliding door.
Fitting an internal door to an existing opening.
Doors up to 2'6" (762mm) use one 2'6" kit.
Doors up to 3'0" (914mm) use one 3'0" kit.
Double doors 2 x 3'0" (buy two kits)
Minimum door thickness 22mm (7/8")
Maximum door weight 35kg (77lbs)
NOTE: The Ballrace system should not be cut down to lengths in between 2'6" (762mm) and 3'0" (914mm). If your door opening is smaller than 3'0", but larger than 2'6" buy the 3'0" kit and position end stops included in the kit to allow the door to open/close properly.
Ball Race Sliding Door Gear Kit Contains
1 Top trackassembly including runner bar, 2 hangers, 2 guide peg,, 2 guide blocks, 2 end stops, 1 bottom channel, fixing screws, nuts & bolts
Tools Required To Fit Ball Race Sliding Door Gear
Screwdriver, 10mm Spanner, Hackshaw, Marker, Drill, Tape Measure